連子
Quiet Privacy, Refined Craft.


RENJII: HINOKI SCREENING
For privacy screens, slatted surrounds and bench risers.
Renjii is a hinoki screening batten, 3,000 x 45 x 30 mm, cut to an angled louvre profile and left rough sawn. Hinoki is Japanese cypress, the timber of temples, shrines and bathhouses: fine even grain, a pale gold colour and a citrusy scent that stays. Made in Japan, held at our Knoxfield workshop in Melbourne and delivered Australia-wide by the pallet. Renjii is one of three hinoki products: Kinuu is the lining and Mukuu is the board.
A Screen That Breathes
The angle-cut face is there to close the line of sight while the gaps stay open to air and light. Set on a rail, a run of Renjii screens a courtyard, a side passage or a bathroom window from the street without closing it in. Brush past it and the scent is there.
Detailed to Dry Out
Rough sawn, insect- and termite-treated with a clear product. Fix with stainless steel screws to a hardwood or steel rail, and leave a drainage gap at the base so the timber dries out after rain rather than sitting wet.
A Patina That Settles
Left bare outside, the screen silvers evenly to a soft grey over a few seasons. Under cover it deepens from cream to gold. Oil it only if you want to hold the darker tone. Otherwise wash it with water and a soft brush.
Specifications

- Species: Chamaecyparis obtusa, hinoki (Japanese cypress)
- Grade: AB clear
- Profile: angle-cut louvre, rough sawn
- Sizes: 3,000 x 45 x 30 mm standard. Widths up to 105 mm and other louvre angles available for custom order.
- Treatment: insect- and termite-treated, clear.
- Drying: kiln-dried
- Use: privacy screens, slatted surrounds, bench risers.
- Fixing: stainless steel screws to a hardwood or steel rail, with a drainage gap at the base.
- Origin: made in Japan. Held in Melbourne, delivered Australia-wide by pallet.
FAQ
The standard Renjii batten is 45 x 30 mm with one angle-cut profile, held in Melbourne. Other louvre angles, and widths up to 105 mm, are available for custom order. Send us the angle, the width and the quantity and we will confirm a lead time.
A hardwood or steel rail, with stainless steel screws. Renjii is fixed to a frame, not set into the ground. Leave a drainage gap at the base of the screen so the battens dry out after rain rather than sitting wet.
It silvers. Fresh hinoki is pale gold. Left bare and open to the weather it settles evenly to a soft grey over a few seasons; under cover it deepens to gold instead. Oil it only if you want to hold the darker tone. Otherwise wash it with water and a soft brush.
It depends on the profile angle, the direction you are screening and how much light you want through. Lay a few battens on the rail on site, look from the street side and set the gap from there, or send us a sketch with the viewing direction and we will suggest one. Keep the drainage gap at the base.